What this calculator gives you
- Pavers — counted from the layout itself: whole pavers, cut pieces at the edges, and your breakage allowance.
- Four patterns — running bond, stack bond, basket weave and 90° herringbone, drawn to scale.
- Base and sand — crushed stone base in tons with 20% for compaction, 1" of bedding sand, and polymeric sand for the joints.
- Edge restraint — the length around the patio and the spikes to hold it.
- Checks — base depth, slivers too thin to stay put, and how much of the patio is cut.
Pavers per square foot
By the nominal size (the paver and its joint), and the pieces for a 10' × 10' and a 12' × 12' patio in running bond, before breakage:
| Paver | Per sq ft | 10' × 10' | 12' × 12' |
|---|---|---|---|
| 4" × 8" brick paver | 4.5 | 465 | 666 |
| 6" × 6" paver | 4 | 410 | 588 |
| 6" × 9" paver | 2.67 | 280 | 396 |
| 6" × 12" paver | 2 | 210 | 300 |
| 12" × 12" patio slab | 1 | 105 | 150 |
| 16" × 16" patio slab | 0.56 | 64 | 85 |
| 12" × 24" plank paver | 0.5 | 55 | 78 |
Pieces include the cut ones at the edges, each counted as a whole paver.
How the numbers are worked out
Pavers
The pattern is laid from one corner over your patio, and every paver that crosses an edge is cut to it. Whole pavers and cut pieces are counted separately; each cut takes a whole paver, so reusing offcuts can save a few. Your breakage allowance (5% to start) goes on top. A cut piece narrower than 1" is flagged: it would break and come loose.
Base, sand and edging
The base reaches 6" past the pavers on every side when there is an edge restraint, so the restraint sits on it. It is measured compacted; crushed stone loses about a sixth of its volume when compacted, so the calculator buys 20% more, at about 1.4 tons per cubic yard. Bedding sand is 1" over the patio, screeded and not compacted, at about 1.35 tons per cubic yard. Edge restraint runs all around, with a spike about every foot.
Frequently asked questions
How many pavers do I need for a 10 x 10 patio?
With 4" × 8" pavers, 100 sq ft takes 450 by area (4.5 per sq ft). Laid in running bond from one corner, it is 465 pieces: 435 whole and 30 cut in half at the ends of every other row. With 5% for breakage, buy 489. The calculator lays out your pattern piece by piece and counts each cut piece as a whole paver.
How many pavers per square foot?
Divide 144 by the paver's face area in square inches: 4.5 per sq ft for 4" × 8" pavers, 2.67 for 6" × 9", 1 for 12" × 12" and 0.56 for 16" × 16". Makers quote coverage by the nominal size, which includes the joint. Then add the cut pieces at the edges and a few percent for breakage.
How deep should the base be for a paver patio?
The Interlocking Concrete Pavement Institute (ICPI) asks for at least 4" of compacted crushed stone under a patio or walk, with 1" of bedding sand on top. On clay soil or where winters freeze, use more; a driveway for cars needs a thicker base still. Dig out the base, the sand and the paver thickness, and run the base past the edges so the edge restraint sits on it.
How much paver base and sand do I need?
A 12' × 12' patio on a 4" base reaching 6" past each edge is 56.3 cu ft of compacted base. Crushed stone packs down about a sixth, so buy 20% more: 3.6 tons at about 1.4 tons per cubic yard. The 1" of bedding sand is 12 cu ft, 0.6 tons. In 0.5 cu ft bags that would be many bags: for more than a small walk, buy by the ton from a landscape yard.
How much polymeric sand do I need?
QUIKRETE rates a 50 lb bag of its PowerLoc jointing sand at about 85 to 90 sq ft of regular pavers, and 50 to 55 sq ft of tumbled pavers with their wider joints. The calculator uses 85 and 50, so a 12' × 12' patio takes 2 bags, or 3 if tumbled. Other brands differ: read the bag.
Which paver pattern needs the fewest cuts?
Stack bond, then running bond: each straight row ends in at most one cut piece at each edge. Herringbone and basket weave need a paver twice as long as it is wide, and herringbone cuts more pieces where it meets the edges — but it locks together best, which is why ICPI recommends it where cars drive.
Planning the rest? Concrete slab calculator · Deck material calculator · Fence calculator